主要出版物
1.A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at A High Temperature. Zhang Changli, Bellet M, Bobadilla M, Shen Houfa, Liu Baicheng. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(9): 2304-2317, 2010
2.Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting. Zhang Jia, Shen Houfa, Huang Tianyou. Advanced Materials Research, 154-155: 1456-1461, 2010
3.High Temperature Mechanical Properties of Micro-Alloyed Carbon Steel in the Mushy Zone. Guo Liangliang, Li Weipeng, Bobadilla M, Yao Man, Shen Houfa. Steel Research International, 81(5): 387-393, 2010
4.板坯结晶器电磁搅拌电磁场与流场的数值模拟. 陈荣, 沈厚发. 连铸, (3): 1-5, 2010
5.大型钢锭凝固过程三维数值模拟. 李文胜, 沈丙振, 周翔, 沈厚发, 柳百成. 大型铸锻件, (3): 1-4, 2010
6.多晶硅铸造过程温度场模拟仿真. 唐亚楠, 沈厚发. 系统仿真学报, 22(7): 1614-1617, 2010
7.Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting. Guo Liangliang, Tian Yong, Yao Man, Shen Houfa. International J Minerals, Metallurgy and Materials, 16(6): 626-631, 2009
8.Water Modelling of the Level Fluctuation in Thin Slab Continuous Casting Mould. Shen Bingzhen, Shen Houfa, Liu Baicheng. Ironmaking and Steelmaking: Products and Applications, 36(1): 33-38, 2009
9.连铸坯凝固过程热力耦合有限元模拟. 陈永, 罗歆, 沈厚发. 钢铁, 44(3): 36-39, 2009
10.工艺模拟软件在连铸机二冷优化方面的应用. 徐光, 田勇, 沈厚发. 宽厚板, 15(1): 37-39, 2009
11.80MN快锻机上横梁铸造工艺仿真与优化. 刘艳, 周守航, 张西鹏, 韩庆礼, 石立文, 沈厚发, 李文胜. 铸造, 58(11): 1129-1133, 2009
12.涡轮盘风冷过程数值模拟研究. 邹金文, 刘东, 柳百成, 沈厚发. 材料工程, (10): 7-10, 2009
13.Optimization of Temperature Distribution in Thick Slab Continuous Casting for Direct Hot Rolling. Guo Liangliang, Tian Yong, Yao Man, Shen Houfa. J Iron and Steel Research International, 15(S1): 239-243, 2008
14.Study on the Control Characteristics of the Secondary Cooling System in Continuous Casting. Zhang Jia, Tian Yong, Shen Houfa, Huang Tianyou. J Iron and Steel Research International, 15(S1): 584-588, 2008
15.Analysis of Thermomechanical Behavior in Continuous Bloom Casting Mold. Chen Yong, Luo Xin, Shen Houfa. J Iron and Steel Research International, 15(S1): 322-326, 2008
16.Finite Element Numerical Simulation on Thermomechanical Couple in Bloom Mold. Chen Yong, Luo Xin, Shen Houfa. J Iron and Steel Research International, 15(S1): 302-306, 2008
17.Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould. Liu Rui, Shen Houfa, Liu Baicheng. Revue de Metallurgie-Cahiers dInformations Techniques. 105(9): 428-435, 2008
18.Numerical Simulation of the Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds. Liu Rui, Ji Wei, Li Jin, Shen Houfa, Liu Baicheng. Steel Research Int, 79(8): 626-631, 2008
19.Solidification Modeling in Continuous Casting by Finite Point Method. Zhang Lei, Rong Yiming, Shen Houfa, Huang Tianyou. Int J Intelligent Systems Technologies and Applications, 4(1-2): 177-187, 2008
20.Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers. Luo Xin, Chen Yong, Shen Houfa. Tsinghua Science and Technology, 13(5): 598-604, 2008
21.连铸结晶器电磁搅拌磁场及钢液流场模拟. 陈永, 张长利, 沈厚发, 柳百成. 钢铁研究学报, 20(7): 11-14, 2008
22.薄板坯连铸工艺因素对结晶器非稳定流场特征参数的影响. 沈丙振, 沈厚发. 北京科技大学学报, 30(7): 800-804, 2008
23.连铸结晶器内大方坯的热力耦合分析. 陈永, 罗歆, 沈厚发. 钢铁, 43(3): 33-37, 2008
24.Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould. Shen Bingzhen, Shen Houfa, Liu Baicheng. ISIJ International, 47(3): 427-432, 2007
25.Water Modeling of the Fluid Flow Instability in Continous Thin Slab Casting Mould. Shen Houfa, Shen Bingzhen, Liu Baicheng. Steel Research Int, 78 (7): 531-535, 2007
26.Solidification Modeling in Continuous Casting by Finite Point Method. Zhang Lei, Rong Yiming, Shen Houfa, Huang Tianyou. J Materials Processing Technology, 192(SI): 511-517, 2007
27.Numerical Simulation on Solidification and Thermal Stress of Continuous Casting Billet in Mold based on Meshless Methods. Zhang Lei, Shen Houfa, Rong Yiming, Huang Tianyou. Materials Science and Engineering A, 466(1-2): 71-78, 2007
28.厚板坯连铸二次冷却过程数值模拟及实验研究. 田勇, 沈厚发, 于功利, 王仁贵, 李泽林. 连铸, (5): 1-5, 2007
29.我国大型铸钢件生产的现状与关键技术. 黄天佑, 刘小刚, 康进武, 沈厚发, 柳百成. 铸造, 56(9): 899-904, 2007
27.Computational Modeling of Macroscopic Transportation in Continuous Casting. Zhang Huanxin, Shen Houfa, Liu Baicheng. Materials Science Forum, 508: 543-548, 2006
28.Lattice BGK Model Simulation of Asymmetric Flow inside a Continuous Slab Casting Mold. Zhang Xiaojun, Shen Houfa. Journal of Hydrodynamics B, 18(4): 431-35, 2006
29.镍基高温合金定向凝固斑点偏析数值模拟研究. 曹海峰, 沈厚发, 柳百成. 稀有金属材料与工程, 35(12): 1849-1853, 2006
30.水口对CSP结晶器流场的影响. 李伟, 沈厚发. 钢铁, 41(S1): 467-471, 2006
31.薄板坯连铸流场特征和浸入式水口研究. 徐荣军, 叶世鸿, 杜锋, 沈厚发. 钢铁, 41(S1): 414-417？, 2006
32.薄板坯连铸CSP结晶器液位波动影响因素的水力学模拟研究. 沈丙振, 叶世鸿, 徐荣军, 李永全, 沈厚发, 柳百成. 钢铁, 41(S1): 305-308, 2006
33.薄板坯连铸流场与中心偏析的大涡模拟. 张焕鑫, 沈厚发, 柳百成. 钢铁, 41(S1): 472-475, 2006
34.板坯连铸结晶器流场的格子法模拟. 张小军, 沈厚发. 机械工程学报, 42(9): 154-159, 2006
35.配点型无网格法及其迭代求解在导热微分方程中的应用. 张雷, 黄天佑, 沈厚发, 柳百成. 机械工程学报, (S1): 78-83, 2006
36.连铸板坯二冷区边界换热与温度场分析. 高文江, 陶金明, 李进, 沈厚发. 冶金自动化, (S2): 29-32, 2006
37.连铸大方坯凝固传热过程的数值模拟. 高文江, 赵克文, 沈厚发. 热加工工艺, 35(17): 66-69, 2006
38.Effect of Electromagnetic Brake on Fluid Flow in Continuous Slab Casting Mould. Shen Houfa, Liu Baicheng, Wang Lei. International Journal of Cast Metals Research, 18(4): 209-213, 2005
39.Fluid Flow and Solidification in Continuous Thin Slab Casting Mold. Zhang Huanxin, Shen Houfa, Liu Baicheng. Trans Indian Inst Met, 58(4): 503-508, 2005
40.Simulation of A-Segregate Formation in Binary Alloys. Cao Haifeng, Shen Houfa, Liu Baicheng, Xu Qingyan. Trans Indian Inst Met, 58(4): 539-543, 2005
41.连续铸造板坯结晶器中流动与液位波动的模拟研究. 张焕鑫, 沈厚发, 柳百成. 铸造, 54(7): 710-712, 2005
42.结晶器电磁制动钢液流场数值模拟. 张桂芳, 沈厚发, 王镭, 柳百成. 铸造, 54(5): 484-487, 2005
43.薄板坯连铸结晶器流场模拟和验证. 张桂芳, 沈厚发, 王镭, 柳百成. 钢铁钒钛, 26(2): 31-34, 2005
44.低碳钢奥氏体再结晶模型的建立. 沈丙振, 方能炜, 沈厚发, 柳百成. 材料科学与工艺, 13(5): 516-520, 2005
45.侧向凝固通道偏析的数值模拟. 曹海峰, 沈厚发, 柳百成. 金属学报, 41: 917-22, 2005
46.Pb-Sn合金凝固过程A偏析数值模拟. 曹海峰, 沈厚发, 柳百成. 材料研究学报, 19(6): 594-600, 2005
47.数值模拟技术在大型铸钢件生产中的应用. 刘小刚, 沈厚发, 康进武, 张雷, 黄天佑, 边敦亭. 热加工工艺, (5): 65-68, 2005
48.镁合金表面覆盖层形成方法及相关国家标准. 张新平, 熊守美, 沈厚发, 柳百成. 材料科学与工艺, 13(6): 627-631, 2005
49.Analysis of Solute Redistribution and Centerline Segregation in Continuously Cast Thin Slab？. Ma Changwen, Shen Houfa, Huang Tianyou, Liu Baicheng. China Foundry, 1(2): 94-98, 2004
50.Effects of Level Magnetic Field and Flow Control Electro Magnetic Brake on Fluid Flow in Thin Slab Continuous Casting Mold. Wang, Lei, Shen Houfa. Kang T'ieh/Iron and Steel, 39(S): 486-490, 2004
51.Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold. Zhang Lei, Kang Jinwu, Shen Houfa, Huang Tianyou. Tsinghua Science and Technology, 9(5): 570-573, 2004
52.Centerline Segregation in Continuously Cast Billets. Ma Changwen, Shen Houfa, Huang Tianyou. Tsinghua Science and Technology, 9(5): 550-554, 2004
53.Fluid Flow in Continuous Casting Mold with a Configured Nozzle. Wang Lei, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 9(6): 617-621, 2004
54. Models of the Static and Metadynamic Recrystallization for Low Carbon Steel during Mechanical Deformation. Shen Bingzhen, Fang Nengwei, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 9(6): 622~627, 2004
55.Numerical Simulation on Macro-segregation in Steel Ingot during Solidification. Ma Changwen, Shen Houfa, Huang Tianyou, Liu Baicheng. Acta Metallurgica Sinica, 17(3): 288-294, 2004
56.连铸结晶器中坯壳生长有限元分析. 王哲, 沈厚发, 柳百成. 永利yl23411官网学报, 44(11): 1448-1451, 2004
57.板坯凝固末端轻压下流动与溶质分布的研究. 马长文, 沈厚发, 黄天佑. 铸造, 53(12): 1023-1027, 2004
58.方坯连铸中心偏析的数值模拟. 马长文, 沈厚发, 黄天佑. 铸造, 53(8): 617-620, 2004
59.新型连铸结晶器流场与液位波动仿真系统. 王镭, 张焕鑫, 沈厚发？, 刘晓, 方园. 连铸, (6): 1-4, 2004
60.连铸轻压下技术的机理比较. 马长文, 沈厚发, 黄天佑. 上海金属, 25(6): 1-5, 2003
61.等轴晶移动对宏观偏析影响的数值模拟. 马长文, 沈厚发, 黄天佑, 柳百成. 材料研究学报, 18(3): 232-238, 2004
62. Pb－Sn合金凝固通道偏析的实验与数值模拟研究. 高宇, 沈厚发, 马长文, 黄天佑. 铸造, 53(10): 814-818, 2004
63.消失模铸造充型凝固过程的计算机仿真. 李锋军, 沈厚发, 柳百成. 机械工程学报, 40(6): 81-84, 2004
64.Modeling of Level Fluctuation in Continuous Casting. Liu Xiao, Zhang Huanxin, Xu Rongjun, Li Yongquan, Shen Houfa, Liu Baicheng. J Mater Sci Technol, 19(S1): 158-160, 2003
65.Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting. Tan Lijian, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 8(1): 83-89, 2003
66.Modeling of Mold Filling and Solidification in Lost Foam Casting. LI Fengjun, Shen Houfa, Liu Baicheng. J Mater Sci Technol, 19(5): 395-397, 2003
67.结晶器液位波动的模拟算法. 谭利坚, 沈厚发, 柳百成, 刘晓, 徐荣军, 李永全. 金属学报, 39(4): 435-438, 2003
68.薄板坯连铸连轧过程温度场模拟. 张雷, 沈厚发, 黄天佑. 连铸, (1): 29-31, 2003
69.热轧过程金属组织－性能模拟研究进展. 沈丙振, 沈厚发, 柳百成. 上海金属, 25(5): 25-29, 2003
70.大型轧钢机架铸造工艺计算机辅助分析. 张雷, 谭利坚, 沈厚发, 黄天佑, 柳百成, 边敦亭, 陈世文, 潘爱胜, 潘宁, 王晓光. 铸造, 52(8): 568-570, 2003
71.定向凝固通道偏析的数值模拟. 马长文, 沈厚发, 黄天佑, 柳百成. 永利yl23411官网学报, 43(11): 1444-1447, 2003
72.消失模铸造充型过程的模拟方法？. 李锋军, 沈厚发, 柳百成. 金属学报, 39(7): 686-690, 2003
73.消失模铸造充型过程的人工神经网络算法. 李锋军, 柳百成, 沈厚发, 禹建丽. 稀有金属材料与工程, 32(4): 268-271, 2003
74.消失模铸造充型过程的计算模型及实验验证. 李锋军, 沈厚发, 柳百成. 永利yl23411官网学报, 43(5): 586-589, 2003
75.消失模铸造液态金属充型速度的试验研究？. 李锋军, 沈厚发, 柳百成, 张殿德. 材料科学与工艺, 11(3): 225-229, 2003
76.Analysis of Heat Transfer and Thermal Stress in Continuous Casting with Mechanical Reduction. Zhang Lei, Shen Houfa, Huang Tianyou, Liu Baicheng. J Cast Metals Research, 15(4): 355-359, 2002
77.An Experimental Study of Deformation of a Columnar Dendritic Mushy Zone using a Transparent Succinonitrile-Acetone Alloy. Shen Houfa, Beckermann C. Metall Mater Trans B, 33: 69-78, 2002
78.Simulation using Realistic Spray Cooling for the Continuous Casting of Multi-component Steel. Shen Houfa, Hardin RA, MacKenzie R, Beckermann C. J Mater Sci Technol, 18(4): 311-314, 2002
79.糊状区变形及浓度再分布的模拟实验研究. 沈厚发, Beckermann C. 金属学报, 38(4): 352-58, 2002
80.Fe-C合金凝固过程流动、传热、传质的耦合数值模拟. 韩志强, 沈厚发, 熊守美, 柳百成. 金属学报, 38: 941-46, 2002
81.合金凝固过程传输模型. 韩志强, 沈厚发, 柳百成. 金属学报, 38: 35-40, 2002
82.消失模铸铁件充型速度的计算及其应用. 李锋军, 柳百成, 沈厚发, 张殿德. 特种铸造及有色合金, (6): 15-17, 2002
83.铸铁件消失模充型速度的测试及计算. 李锋军, 林青松, 张殿德, 沈厚发, 柳百成. 现代铸铁, (1): 21-23, 2002
96.面向21世纪的铸造技术. 柳百成, 沈厚发. 特种铸造及有色合金, (6): 11-12, 2000
97.Prevention of Macrodefects in Squeeze Casting of an Al-7Wt Pct Si Alloy. Hong CP, Shen Houfa, Lee SM. Metall Mater Trans B, 31: 297-305, 2000
98.Formation Criterion of Macrosegregation in a Squeeze Cast Al-7mass% Si Alloy. Lee SM, Shen Houfa, Hong CP. ISIJ International, 39: 1160-68, 1999
99.Prevention of Macrosegregation in Squeeze Casting of an Al-4.5 Wt Pct Cu Alloy. Hong CP, Shen Houfa, Cho IS. Metall Mater Trans A, 29: 339-49, 1998
100.耦合传热与流动的铝合金铸件充型三维数值模拟. 邱伟, 沈厚发, 高志强, 白雪峰, 柳百成. 铸造, (4): 1-4, 1997
101.Study and Application of Mold Filling Simulation of Shaped Casting. Liu Baicheng, Qiu Wei, Shen Houfa, Gao Zhiqiang. Journal of Materials Science Technology, 13: 107-12, 1997
102.Progress in Numerical Simulation of Solidification Process of Shaped Casting. Liu Baicheng, Shen Houfa, Li Wenzhen. Journal of Materials Science and Technology, 11: 313-22, 1995